Furnace Repair in Kamas, UT
Cabin or year-round home, if the furnace quits in the Kamas Valley you need it fixed fast. We find the problem and put the price in writing first. $39 to diagnose it.
- Licensed & Insured
Lic #14278324-5501 - 5-Star Rated
on Google - $39 Diagnostic
Goes Toward the Repair - 24/7
Emergency Service
Kamas Valley Cold Is the Real Thing
Kamas sits at about 6,500 feet, and the Kamas Valley gets some of the coldest nights in this part of Utah. Furnaces out here run hard all winter, and snow drifts against the sides of houses and cabins.
A lot of the homes and cabins in Kamas, Samak, Woodland, and up the Mirror Lake Highway sit empty for days or weeks at a time. A furnace that quits while nobody's there can freeze the pipes. We've done work on cabins out this way, and we know what a long drive in the snow means if something gets missed.
We're based in Sandy, about 50 minutes from Kamas, through Park City and out SR-248. We'll tell you up front when we can get there.
What We Fix on Mountain Furnaces
These are the furnace calls we run up here most. Snow, cold, and elevation cause problems you don't see as much in the valley.
Vent pipes buried in snow
High-efficiency furnaces breathe through two PVC pipes on the side of the house. When snow drifts or slides off the roof and covers them, the furnace shuts itself down to stay safe. Up here that happens every winter.
Frozen condensate lines
These furnaces make water. If the drain line runs through a cold garage, crawlspace, or outside wall, it can freeze on a cold night and the furnace locks out until the water can get out.
Furnaces that never get a break
At about 6,500 feet, a furnace runs a lot more hours than one in the valley. Igniters, inducer motors, and blower motors wear out sooner, and a dirty filter does more damage.
Elevation setup
Gas furnaces up here have to be set up for the altitude, per the manufacturer's high altitude instructions. When that step got skipped, we see rough flames, soot, and pressure switch lockouts.
Second homes nobody was watching
A furnace that quits while the house sits empty can mean frozen pipes by the time anyone finds out. We work with owners and property managers to get in, find it, and get the heat back on.
Flame sensors and igniters
Still the most common no-heat calls, anywhere. Quick fixes, and we keep the common parts on the van so we're not driving back down the canyon for one.
Before You Call, Check These
A few of these solve the problem without a service call, and that matters when we're driving up the canyon.
- Thermostat is set to Heat and a few degrees above the room
- The two PVC vent pipes outside aren't buried in snow or ice. Clear them by hand, gently.
- The filter isn't packed with dust
- Furnace switch and breaker are both on
- No water around the furnace or a frozen drain line
- Smell gas? Get everyone out, don't touch any switches, and call Enbridge Gas or 911 from outside
That's our weekday fee, Monday through Friday, 9am to 5pm, to come out and track down the problem. If we do the repair, the $39 is credited toward it.
Nights, weekends, and holidays: $99.
Schedule a RepairWhat Furnace Repair Costs in Kamas
These are the repairs we do most in Kamas and what they usually run. You get the exact number in writing before any work.
| Repair | Typical price |
|---|---|
| Flame sensor clean or replaceLights, runs for a minute, then shuts down. This is usually why. | $105 to $445 |
| Blower wheel cleaning or replacementYears of skipped filters pack the wheel with dust. | $275 to $475 |
| Inducer motor replacementA common big repair on furnaces put in during the 90s. | $950 to $1,250 |
| Blower motor replacementWhen the main fan motor finally wears out. | $450 to $1,900 |
Duct repairs and sealing old swamp cooler vents are quoted on site. See our full furnace repair price list for other parts.
Real Furnace Work
Photos from our own furnace calls, not stock pictures.


What Homeowners Say
"Michael is knowledgeable, dependable, thorough, and really cares about helping his customers. He goes above and beyond, taking the time to explain things clearly and making sure everything is handled properly."Sheila B.HVAC service
"Great team and very responsive, was able to get help with our AC quickly and they were informative without being pushy or overbearing!"Taylor C.HVAC service
"They did a thorough inspection and cleaned both the indoor coil and outdoor condenser. The technician explained what they were doing, was professional, and left everything clean when they were finished."Tech M.HVAC tune-up
Kamas Furnace Repair FAQs
How much does furnace repair cost in Kamas?
A weekday diagnostic is $39, and it goes toward the repair if you go ahead. Small parts like a flame sensor or igniter usually run $105 to $450. Bigger parts like an inducer motor or control board run $350 to $1,900. You see the price in writing before we start.
Can you fix the furnace at my cabin if I'm not there?
Yes. Give us a gate code, key spot, or lockbox and we'll handle it. We send you what we found and the price, and nothing gets repaired until you approve it.
How do I keep my cabin pipes from freezing if the furnace quits?
Keep the furnace serviced, keep the vent pipes clear of snow, and think about a smart thermostat or temperature alert so you know the minute the heat drops. Know where your main water shutoff is, and shut it off when you leave for long stretches.
Does elevation affect my furnace?
Yes. Gas furnaces need to be set up for the altitude per the manufacturer's instructions. If that wasn't done, the furnace can burn rough or lock out. We check it on every call up here.
Do you come out to Kamas on nights and weekends?
Yes. Nights, weekends, and holidays are a $99 dispatch fee. Weekdays 9 to 5 it's $39, and that goes toward the repair.
Where We Work Around Kamas
Kamas and the whole Kamas Valley, including Samak, Woodland, Francis, Oakley, Marion, and the cabins up the Mirror Lake Highway.
No Heat in Kamas? Give Us a Call
Book online or call. We'll tell you when we can get there and what it costs before we fix anything.
