Furnace Replacement in Sandy, UT
A furnace is the heart of your home’s comfort through a cold Sandy winter, so when it’s time to replace one, you want it done right. Jaeger Plumbing, Heating & Air replaces and installs gas furnaces for homeowners in Sandy, sizing each one to your actual home, not padding the quote with a bigger unit than you need. Whether you’re replacing a furnace that’s on its last leg or installing a new one, you’ll get straight answers, professional installation, and an upfront, flat-rate price before we begin. If you’re weighing a heat pump instead, we can walk you through that option too.
Signs It's Time to Replace Your Furnace
A furnace usually gives you warning before it fails for good. If several of these sound familiar, it’s worth pricing a replacement before the coldest night of the year:
- Your furnace is 15 to 20 years old or more
- You’ve been told the heat exchanger is cracked or failing
- Heating bills keep climbing even though your usage hasn’t changed
- Some rooms never get as warm as others
- The furnace short-cycles, turning on and off repeatedly
- The burner flame is yellow or flickering instead of a steady blue
- The igniter or pilot keeps failing, or the furnace is getting loud
- Repairs are adding up season after season, sometimes a furnace repair is the smarter call, and we’ll tell you honestly which makes sense.
Gas Furnaces We Install
Not every furnace is the same, and the type you choose affects your comfort, your energy bills, and how evenly your home heats. We install and help you choose from:
- Single-stage furnaces — the burner runs at full output whenever it’s on. Reliable and the most affordable up front.
- Two-stage furnaces — run on a lower setting most of the time and step up to full power only when needed, for more even heat and better efficiency.
- Modulating furnaces — adjust their output in fine increments to hold a steady temperature, the most efficient and comfortable option.
- Variable-speed blowers — pair with two-stage and modulating furnaces to move air quietly and efficiently, and improve airflow for cooling too.
Furnace Efficiency & What AFUE Means for Your Bills
Furnace efficiency is measured in Annual Fuel Utilization Efficiency (AFUE), or how much of your gas actually becomes heat in your home. An older furnace might run around 70 to 80% AFUE, meaning up to a fifth or more of what you pay for goes up the flue. A high-efficiency condensing furnace reaches 90 to 98%+ by pulling extra heat out of the exhaust with a second heat exchanger, which also means it vents through PVC and produces a little condensate that drains away. We’ll show you the efficiency options at different price points so you can weigh a higher upfront cost against lower monthly bills over the life of the furnace.
Right-Sizing Your New Furnace
A furnace that’s too large short-cycles, wears out faster, and heats unevenly; one that’s too small never keeps up on a cold Sandy night. Rather than matching whatever was there before or guessing from square footage, we run a Manual J load calculation that accounts for your home’s size, insulation, windows, and ductwork to determine the right heating output (measured in BTUs). Correct sizing is one of the biggest reasons a new furnace either runs efficiently for years or disappoints from day one.
Furnace Replacement Cost, Financing & Rebates in Sandy
The cost of a furnace replacement depends on the efficiency and type you choose (single-stage, two-stage, or modulating), the size your home needs, and whether any venting or ductwork has to be updated. Rather than a vague phone estimate, we give you an upfront, flat-rate quote after seeing your home. Financing is available on new furnaces, and high-efficiency models may qualify for federal energy-efficiency tax credits and local rebates through Dominion Energy.
Should You Repair or Replace Your Furnace?
If your furnace is relatively new and the problem is a single part, a repair is usually the right call. But once a furnace is past 12 to 15 years, the repairs are adding up, or the heat exchanger is failing, replacement often costs less over time. A good rule of thumb: if a repair runs more than half the price of a new furnace, replacement is usually the smarter investment. Not sure where yours stands? We’ll take a look, see our furnace repair service, and give you an honest recommendation either way.
What's Involved in a Furnace Installation
- In-home assessment: We evaluate your current furnace, ductwork, gas line, and venting, run a load calculation, and recommend the right unit. Call (801) 509-9331 or book online to start.
- Clear options and a flat-rate quote: We walk you through furnace types and efficiency levels with upfront pricing and financing, no pressure.
- Professional installation: We safely remove the old furnace and install the new one, connecting the gas line and venting (metal or PVC depending on efficiency) and pulling the permits Sandy requires.
- Combustion and safety testing: We test combustion, confirm proper venting and carbon monoxide safety, and set up the condensate drain on high-efficiency models.
- Thermostat setup and walkthrough: We configure your smart thermostat, confirm the home is heating evenly, and show you how everything works before we leave.