24/7 Emergency Service, $39 Weekday Diagnostic

Heating Repair & Furnace Service in Sandy, UT

Need heating repair in Sandy? No heat, a furnace that won't stay lit, or a system that's done. We find the problem, give you the price in writing, and fix it right the first time.

  • Licensed & Insured
    Lic #14278324-5501
  • 5-Star Rated
    on Google
  • $39 Diagnostic
    Goes Toward the Repair
  • 24/7
    Emergency Service

Common Heating Repair Prices

Most no-heat calls come down to one of these parts. Here's what they typically run in Sandy and the south valley, so you're not guessing.

On weekdays it's $39 for us to come out, and that goes toward the repair. After 5pm, weekends, and holidays, the dispatch fee is $99. You get the exact price in writing before any work starts.
RepairTypical price
Flame sensor clean or replaceThe number one reason a furnace lights, then shuts right back off.$105 to $445
Blower capacitor replacementThe blower hums and struggles, then quits.$150 to $350
Igniter, pressure switch, or limit switchAny of these can keep the furnace from lighting at all.$300 to $450
Gas valve replacementThe igniter glows but the gas never comes on.$450 to $1,650
Blower motor replacementThe main fan that pushes warm air through your ducts.$450 to $1,900
Control board replacementThe furnace's brain. Usually fails after a power surge or with age.$350 to $1,900
Furnace tune-up21 points, cleaning included, full written report.$69

Typical price ranges. ECM blower motors, modulating gas valves, and parts for high-efficiency or older furnaces run toward the top. Your price depends on the furnace make and model and how easy it is to get to. See all repairs and prices on our furnace repair page.

Everything Else We Do

Gas furnaces are most of what we see in Sandy, but we work on every kind of heat.

  • Heat pump repair & installation
  • Dual-fuel heat pump systems
  • Ductless mini-split heat pumps
  • Boiler & radiant heat service
  • Hydronic furnace installation
  • Smart & digital thermostat installs
  • Whole-home humidifiers
  • Media filters & indoor air quality
  • Carbon monoxide testing
  • Inducer motor & gas valve replacement
  • Gas lines for furnaces and appliances
  • Heating system replacement

How It Works

Call or book online

Tell us what the furnace is doing. We're available 24/7.

We find the problem

$39 to diagnose it on weekdays, $99 after hours. We test it, not guess, and show you what we found.

You get a written price

The exact price before any work starts. Repair or replace, you decide. No pressure.

We fix it right

If the parts are on the van, we fix it right then, and we clean up before we leave.

What Homeowners Say

"Michael is knowledgeable, dependable, thorough, and really cares about helping his customers. He goes above and beyond, taking the time to explain things clearly and making sure everything is handled properly."
Sheila B.HVAC service
"Great team and very responsive, was able to get help with our AC quickly and they were informative without being pushy or overbearing!"
Taylor C.HVAC service
"They did a thorough inspection and cleaned both the indoor coil and outdoor condenser. The technician explained what they were doing, was professional, and left everything clean when they were finished."
Tech M.HVAC tune-up

Heating Repair Questions

How much does heating repair cost in Sandy, UT?

On weekdays it's $39 for us to come out and diagnose it, and that goes toward the repair. Most common furnace repairs run $105 to $450, like a flame sensor, igniter, or pressure switch. Bigger parts like a blower motor, gas valve, or control board run $450 to $1,900, depending on the part and the furnace. You get the exact price in writing before any work starts.

Do you do emergency heating repair?

Yes, 24/7, including weekends and holidays. The after-hours dispatch fee is $99 after 5pm and on weekends. If you smell gas, leave the house first and call Enbridge Gas or 911 from outside.

Should I repair or replace my furnace?

If it's under 15 years old and the problem is one part, repair usually makes sense. If the heat exchanger is cracked, or it's 15 to 20 years old and needs a major part, replacement is usually the better money. We'll give you the price for both so you can decide.

How often should a furnace be serviced?

Once a year, ideally in the fall before the first cold snap. A tune-up catches worn igniters, dirty flame sensors, and weak capacitors before they leave you without heat in January.

Do you work on heat pumps and boilers?

Yes. We repair and install heat pumps, dual-fuel systems, ductless mini-splits, boilers, and radiant heat. Heat pump installs may qualify for rebates from Rocky Mountain Power and Enbridge Gas, and we'll check what applies to your home.

What areas do you serve?

We're based in Sandy and work across the south end of the Salt Lake Valley and Salt Lake City, including Draper, South Jordan, West Jordan, Midvale, Cottonwood Heights, Murray, Riverton, and Herriman.

Areas We Serve

Your local heating company in Sandy, serving homes across the south end of the valley and Salt Lake City.

We also travel farther, from Ogden to Nephi, out to Tooele, and up to Kamas. Call and we'll let you know.

No Heat? Let's Get It Running

$39 weekday diagnostic that goes toward the repair. 24/7 emergency service. Book online or give us a call.

Scroll to Top