24/7 Emergency Service

Emergency Furnace Repair in Sandy, UT

No heat on a freezing night? Call us any time, day or night. We find the problem, give you the price in writing, and get your heat back on.

  • Licensed & Insured
    Lic #14278324-5501
  • 5-Star Rated
    on Google
  • $39 Diagnostic
    Goes Toward the Repair
  • 24/7
    Emergency Service

Is It an Emergency?

Some furnace problems can't wait, especially in a Utah winter. Here's how to tell.

Call now if

  • The furnace quit and it's freezing outside
  • You have babies, older family, or pets at home with no heat
  • You smell burning or see smoke
  • It keeps tripping the breaker
  • It turns on and off and won't stay running

It can wait if

  • Heat is weak but the house is still comfortable
  • One room is cooler than the rest
  • It's a little louder than usual, with no other problems

Book a regular furnace repair →

Smell gas? Leave the house right away. Don't flip any switches. Call Enbridge Gas or 911 from outside, then call us. Carbon monoxide alarm going off? Get everyone out and call 911.

Furnace Emergencies We Fix

Most no-heat calls come down to one part. We find it, fix it, and make sure it's running safely before we leave.

No heat at all

The thermostat is calling but nothing happens. Often an igniter, pressure switch, or control board.

Blowing cold air

The fan runs but the burners won't stay lit. A dirty flame sensor is the most common cause.

Turns on, then shuts off

Short cycling from a flame sensor, a clogged filter, or the furnace overheating.

Loud noises or burning smell

A failing blower or inducer motor. Shut it off and call us.

Tripping the breaker

A shorted motor, capacitor, or wiring problem. Reset it once. If it trips again, leave it off.

Blower won't run

The burners light but no warm air reaches the vents. Usually the blower motor or capacitor.

Emergency Furnace Repair Cost

Weekdays 9 to 5, it's $39 for us to come out, and that goes toward the repair. After 5pm, weekends, and holidays, the dispatch fee is $99. You get the exact repair price in writing before any work starts.
75 to $475
RepairTypical price
Flame sensor clean or replaceThe number one reason a furnace lights, then shuts right back off.$105 to $445
Blower capacitor replacementA weak capacitor makes the blower motor hum, struggle, then quit.$150 to $350
Pull and deep clean burnersDirty burners light rough and burn more gas.$250 to $350
Blower wheel cleaning or replacementA caked wheel moves less air and overheats the furnace.$275 to $475
Igniter, pressure switch, or limit switchAny of these can keep the furnace from lighting at all.$300 to $450
Gas valve replacementWhen the igniter glows but the gas never comes on.$450 to $1,650
Inducer (draft) motor replacementThe small motor that clears exhaust before the burners light. Loud whining is a common warning sign.$950 to $1,250
Blower motor replacementThe main fan that pushes warm air through your ducts.$450 to $1,900
Control board replacementThe furnace's brain. Usually fails after a power surge or with age.$350 to $1,900

Typical price ranges. ECM blower motors, modulating gas valves, and parts for high-efficiency or older furnaces run toward the top. Your price depends on the furnace make and model and how easy it is to get to. The $39 diagnostic goes toward any repair you approve.

While You Wait

A few things to keep you safe and warm until we get there.

  • Check that the thermostat is on heat and set a few degrees above room temperature
  • Make sure the furnace switch and breaker are on. Reset a tripped breaker once only
  • Check the filter. A clogged filter can shut a furnace down
  • Layer up and close off rooms you aren't using
  • Never use the stove or oven for heat. It's a carbon monoxide risk
  • If it's below freezing, open cabinet doors under sinks and let a faucet drip. See frozen pipes

How It Works

Call us 24/7

Tell us what the furnace is doing. We'll help you figure out if it can wait or needs someone tonight.

We get to you fast

No-heat calls get priority, and we come out the same day whenever we can.

You get a written price

We find the real problem and give you the price before any work starts. No pressure.

Fixed and safety checked

We fix it, then check that it's heating and venting safely, including carbon monoxide, before we leave.

What Homeowners Say

"Michael is knowledgeable, dependable, thorough, and really cares about helping his customers. He goes above and beyond, taking the time to explain things clearly and making sure everything is handled properly."
Sheila B.HVAC service
"Great team and very responsive, was able to get help with our AC quickly and they were informative without being pushy or overbearing!"
Taylor C.HVAC service
"They did a thorough inspection and cleaned both the indoor coil and outdoor condenser. The technician explained what they were doing, was professional, and left everything clean when they were finished."
Tech M.HVAC tune-up

Emergency Furnace Repair Questions

Do you do 24/7 emergency furnace repair?

Yes, 24/7, including nights, weekends, and holidays. On weekdays from 9 to 5 it's $39 to come out, credited to the repair. After 5pm, weekends, and holidays, the dispatch fee is $99.

How fast can you get to my home?

No-heat calls get priority, and we come out the same day whenever we can. Call and we'll tell you when we can be there.

How much does emergency furnace repair cost?

Most common repairs run $105 to $450, like a flame sensor, igniter, or capacitor. Bigger parts like a blower motor, gas valve, or control board run $450 to $1,900. You get the exact price in writing before any work starts.

Why is my furnace blowing cold air?

Usually a dirty flame sensor or a failed igniter, so the burners won't stay lit while the fan keeps running. It can also be a thermostat setting or a clogged filter. We find the exact cause and fix it.

What should I do if I smell gas?

Leave the house right away and don't flip any switches. Call Enbridge Gas or 911 from outside. A gas smell is an emergency, not a service call.

Is it safe to run my furnace if the carbon monoxide alarm went off?

No. Get everyone out, call 911, and have the furnace checked before running it again. A cracked heat exchanger is one cause we check for.

Should I repair or replace my furnace?

If it's 10 years old or newer and still under its parts warranty, repairing is usually a lot cheaper. If it's older and needs a big part, or the heat exchanger is cracked, replacing usually makes more sense. We'll give you both prices. See furnace replacement.

No heat right now? Before you call, try these quick checks. It might be something simple. Furnace Won't Turn On? What to Check First →

Areas We Serve

Based in Sandy and serving homes across the south end of the valley and Salt Lake City.

We also travel farther, from Ogden to Nephi, out to Tooele, and up to Kamas. Call and we'll let you know.

No Heat? Call Us Now

We answer 24/7. $39 weekday diagnostic that goes toward the repair, $99 after hours.

Scroll to Top