Furnace Replacement in Riverton, UT
Riverton has everything from 1970s ramblers to 2000s two-stories, and each one needs a furnace sized and vented for that house. Free estimate, price in writing, installed to code.
- Licensed & Insured
Lic #14278324-5501 - 5-Star Rated
on Google - Free In-Home
Estimate - Financing
Available
Riverton Homes Run the Whole Range
Riverton started as a farm town called Gardnersville, was renamed in 1879, and incorporated in 1948. Subdivisions spread in the 60s and 70s, then the city more than doubled in the 1990s. One street can have a 45 year old furnace and the next one a 20 year old one.
Older homes often still have an 80% furnace with a metal flue, sometimes sharing a chimney with the water heater. Going high-efficiency means new PVC venting, a condensate drain, and making sure the water heater still vents right on its own. We plan all of that before we quote.
Riverton requires a permit to replace a furnace and an inspection after. We handle the permit and the inspection for you.
Signs Your Riverton Furnace Is Wearing Out
If two or more of these sound like your house, start planning before it fails in January.
Original furnace from the 70s, 80s or 90s
Anything past 18 to 20 years is living on borrowed time.
Short cycling
On and off every few minutes. Can be sizing, a failing part, or airflow.
Weak airflow upstairs
Tired blower motors and builder ductwork show up here first.
Burning smell that won't go away
Dust on first start up is normal. A smell that sticks around isn't.
CO alarm or failed test
Shut it off and call. Heat exchanger problems mean replacement.
Expensive repair quoted
If a single repair is near half the price of a new furnace, replacing usually wins.
New Furnace Pricing in Riverton
Typical installed prices for Riverton homes.
| Furnace | Installed price |
|---|---|
| Standard 80% furnaceThe budget pick when the existing venting works. | $4,000 to $6,500 |
| High-efficiency 96% furnaceTwo-stage, variable-speed blower on most. Rebate eligible. | $6,500 to $10,500 |
| 97% modulating furnaceFor the most comfortable, efficient setup. | $8,500 to $12,500 |
| Tight closet or venting changesSmall mechanical rooms sometimes need extra work to fit. | Quoted on site |
Ranges, not quotes. Size, efficiency, and how the mechanical room is laid out decide the final number, and you get it in writing first.
Every Install Includes
- Sizing for your actual home
- Matched to the AC coil and ducts
- Gas and shutoff
- Correct venting for the model
- Condensate drain where needed
- Riverton permit and inspection
- Haul away of the old unit
- Combustion and CO testing
- 2 year labor warranty from us on a new furnace, 5 years when we replace the whole system, plus the manufacturer warranty registered for you
Enbridge Gas pays $300 on a 95% to 97.4% furnace and $350 on 97.5% and up, in an existing home. Our 96% and 97% furnaces qualify, and we help with the paperwork. Rebates are set by ThermWise and can change.
Want to spread it out? Check financing in about a minute with no hit to your credit.
Check FinancingRepair First, or Go New?
We'll tell you straight when a repair is the better deal.
Fixing it is usually the move when
- Furnace is 10 years or newer
- Covered by parts warranty
- Simple part like an igniter or flame sensor
Replacing it makes more sense when
- Past 18 years with a major failure
- Heat exchanger problem
- Repairs adding up every season
Only need a fix? See furnace repair in Riverton.
Install Work From Our Jobs
Real photos from installs we have done, not stock.
How a Replacement Goes
Book a free estimate
Book online or call. We come out, look at the house, and measure what it actually needs.
Get options in writing
Usually two or three furnaces at different price points, with the full installed price on each.
Install day
Most swaps take one day. Old furnace out, new one in, gas, venting, and drain hooked up to code.
Test and walk through
We test combustion and carbon monoxide, set the thermostat, and show you the filter and basics before we leave.
What Homeowners Say
"Michael is knowledgeable, dependable, thorough, and really cares about helping his customers. He goes above and beyond, taking the time to explain things clearly and making sure everything is handled properly."Sheila B.HVAC service
"Great team and very responsive, was able to get help with our AC quickly and they were informative without being pushy or overbearing!"Taylor C.HVAC service
"They did a thorough inspection and cleaned both the indoor coil and outdoor condenser. The technician explained what they were doing, was professional, and left everything clean when they were finished."Tech M.HVAC tune-up
Riverton Furnace Replacement FAQs
What does a new furnace cost in Riverton?
Most run $4,000 to $6,500 for 80%, $6,500 to $10,500 for 96%, and $8,500 to $12,500 for a 97% modulating furnace, installed. Free estimate, written price.
Will a new furnace fit in my mechanical closet?
Almost always. We measure the space and the venting path before we quote, so you know up front.
My furnace shares a chimney with the water heater. Is that a problem?
It can be. If the furnace moves to PVC venting, the water heater is left alone on a flue sized for two. We check that it still drafts right, and line or resize the flue if it needs it.
Is there a rebate?
Enbridge pays $300 on a 95% to 97.4% furnace and $350 on 97.5% and up in an existing home. Our 96% and 97% furnaces qualify.
Do you offer financing?
Yes. You can check options in about a minute with no hit to your credit.
What about a heat pump?
Rebates can reach $2,650 from Rocky Mountain Power and Enbridge. See heat pumps.
Riverton Areas We Serve
All of Riverton, from the older streets along Redwood Road and around Riverton City Park to the newer neighborhoods on the west side.
Time for a New Furnace in Riverton?
Book a free estimate and get real options in writing.