Boiler Repair in Midway, UT
Cold radiant floors, a noisy boiler, or a combi unit that keeps locking out? We fix hot water heat in Midway and give you the price in writing first.
- Licensed & Insured
Lic #14278324-5501 - 5-Star Rated
on Google - $39 Diagnostic
Goes Toward the Repair - 24/7
Emergency Service
Hot Water Heat in Midway
A lot of Midway homes, from the custom builds around the Homestead and Zermatt to newer homes on the edge of town, heat with a boiler and radiant floors or baseboard. Some have snowmelt, and plenty have a combi boiler that handles the hot water too.
Up at about 5,600 feet with cold winter nights, a boiler works hard. We see stuck zone valves, failed circulators, low glycol, and units that were never set up for the elevation.
Plumbing and heating are both in our name, and a boiler is both. We're based in Sandy, under an hour from Midway.
Signs Your Boiler Needs Service
A lot of Midway boilers heat rentals and custom homes. These are the problems we run into most.
Rentals and guest homes
When a boiler quits in a short-term rental, it's usually a guest who finds out first. We work with owners, managers, and cleaners to get in fast.
Radiant floors in custom homes
Radiant floors are comfortable when they work. When a mixing valve or zone actuator fails, rooms go cold and it's hard to tell why.
Combi boilers doing double duty
A combi boiler handles heat and hot water. When a shower stalls the heat, or the heat stalls the hot water, it's usually a flow sensor or scale.
Scale from hard water
Hard water builds scale inside combi boilers and their heat exchangers. A yearly descale keeps them from overheating and throwing codes.
Snowmelt and heated walkways
Heated walks and driveways around Midway homes add a big load. Low glycol or a weak pump shows up as ice.
Pumps and zone valves wearing out
Circulator pumps and zone valves are the parts that wear the most. When they go, the boiler gets hot but the house doesn't.
Quick Checks Before You Call
A couple of these fix more no heat calls than you'd think.
- The thermostat for that zone is set to Heat and above the room temperature
- The boiler's power switch is on. It's often a light switch on the wall or on the boiler itself.
- Look at the pressure gauge. Under 10 psi cold is usually too low.
- Write down any error code on the display
- Radiator valves are open, and furniture isn't blocking baseboard heaters
That's what it costs for us to come out and find the problem, Monday through Friday, 9am to 5pm. Go ahead with the repair and the $39 comes off your bill.
Nights, weekends, and holidays: $99.
Schedule a RepairBoiler Repair Prices
Here's what the common boiler repairs typically run. Every system is a little different, so you get the exact price in writing before any work starts.
| Repair | Typical price |
|---|---|
| Bleed air out of the systemClears the gurgling and the cold spots at the top of radiators or baseboard. Glycol systems may need a top off after. | $250 to $475 |
| Pressure relief valve replacementWhen the valve drips or won't seat. | $345 to $625 |
| Expansion tank replacementA waterlogged tank makes the pressure swing every time the boiler fires. | $365 to $800 |
| Igniter or flame sensorThe usual fix when the boiler tries to fire and locks out. | $295 to $625 |
| Zone valve replacementWhen one area of the house stays cold and the rest heats fine. | $550 to $1,125 |
| Circulator pump replacementThe pump that moves hot water through the house. A failed pump means hot boiler, cold house. | $725 to $1,800 |
| Glycol refill, if neededIf your system runs glycol, opening the lines to bleed air or change a part loses some. Pumping it back in and purging the air takes time. Price covers the labor and the glycol. | $450 to $890 |
| Heat exchanger replacementWhen the heat exchanger cracks or leaks. On some boilers it makes more sense to replace the whole unit, and we'll show you both prices. | $2,000 to $5,500 |
| Boiler replacementA new high efficiency or combi boiler, installed to code. | $8,000 to $16,000 |
These are reference prices, not a bill. We show you what we found and why it needs fixing, then you decide. No pressure either way.
Repair or Replace?
A good boiler can run 25 to 30 years, so most of the time a repair is the right call. Replacing starts to make sense when:
- The heat exchanger or the boiler itself is leaking
- Parts for it aren't made anymore
- You're paying for a repair every winter, or the gas bill keeps climbing
If that's where yours is, we'll give you both prices side by side. A new high efficiency boiler can keep your radiators or radiant floor, and a combi unit can handle your hot water too.
Boiler Work We've Done
Real photos from our jobs. No stock pictures.


What Homeowners Say
"Michael is knowledgeable, dependable, thorough, and really cares about helping his customers. He goes above and beyond, taking the time to explain things clearly and making sure everything is handled properly."Sheila B.HVAC service
"Great team and very responsive, was able to get help with our AC quickly and they were informative without being pushy or overbearing!"Taylor C.HVAC service
"They did a thorough inspection and cleaned both the indoor coil and outdoor condenser. The technician explained what they were doing, was professional, and left everything clean when they were finished."Tech M.HVAC tune-up
Midway Boiler Repair FAQs
How much does boiler repair cost in Midway?
It's $39 on a weekday for us to come out and diagnose it, and that goes toward the repair if you go ahead. Common fixes like bleeding air, a relief valve, or an expansion tank run $250 to $800. Bigger parts like a circulator pump or zone valve run $550 to $1,800. If your system runs glycol and we have to open the lines, refilling it runs $450 to $890. You get the price in writing first.
I manage a rental in Midway. Can you work with my guests or cleaners?
Yes. Give us a contact and a lockbox or door code, and we'll set it up. You get photos and the price before any work is done, and we'll keep it quick so it doesn't hurt your next booking.
My combi boiler gives me heat but no hot water. What's wrong?
Combis switch between heat and hot water. If one stops working, it's often a flow sensor, a diverter valve, or scale in the heat exchanger. We test before we replace anything.
Do you descale combi boilers?
Yes. With hard water, a yearly descale keeps a combi boiler running cleaner and longer. We flush the heat exchanger and check the inlet filter while we're there.
How often should a boiler be serviced?
Once a year, before winter. We check pressure, the expansion tank, the relief valve, pumps, combustion, and glycol if you have it.
Do you come out on nights and weekends?
Yes. Nights, weekends, and holidays are a $99 dispatch fee. Weekdays 9 to 5 it's $39, and that goes toward the repair.
Where We Work Around Midway
All over Midway, from the older homes near Main Street and the town square to the neighborhoods around the Homestead, Zermatt, Interlaken, and out toward Soldier Hollow and Charleston.
Boiler Trouble in Midway?
Book online or give us a call. We'll find the problem and give you the price before we fix anything.
